Application:
ATI X800 (R430) (XL), X850 (R480) (Pro,XT,XT PE)

AGP & PCIe:
ATI X800 (all versions, except AIW)
ATI X850 (all versions, except AIW)

-kompatibilita zaručena výrobcem jen v případech referenčních layoutů výrobců ATI nebo NVIDIA
-doporučujeme posoudit rozměry Vaší karty s technickým nákresem výrobce (k dispozici na www výrobce)
-na reklamace vlivem nesprávného výběru nebude brán zřetel


**Easier Installation
New clip and back plate design for better fit.

**Exhanced Compatibility
New fan casing design to enhance compatibility.

**Clicking Noise Solution
A filter is integrated into the PCB to reduce the noise generated from the motor.

Extremely quiet
A large fan and optimized fanblades offer a minimum noise level at a high air flow.

Unique Cooling Performance
Highest fin surface area and a 3.5 mm thick copper base achieve best cooling performance at its noise level.

High Service Life (L10 at 30°C: 274000h)
Our ARCTIC Ceramic Bearing (alloy bearing and Ceramic shaft) provides our fans with an outstanding service life.

6 Years Warranty

DHES (Direct Heat Exhaust System)
The DHES draws cool air from inside the case and exhausts warm
air outwards. This prevents the fan from recycling warm air to cool the
GPU, which increases cooling performance.
Further the DHES lowers the air temperature inside the case, because the heat
of the GPU will be carried out directly.

Easy Installation
Compared to our VGA Silencer, we could ease the installation process significantly.


**New Features in Rev. 2

Fan: 72 mm
Overall Dimensions (active GPU Cooler): 218.5 x 100 x 31 mm
Overall Dimensions (passive Memory Cooler): 137 x 103 x 35 mm
Rated Fan Speed: 2000 RPM
Bearing: ARCTIC Ceramic Bearing
Noise Level: 0.5 Sone
Weight (active GPU Cooler): 100 g
Weight (passive Memory Cooler): 56 g
Warranty: 6 Years

 Application:
AGP: Geforce 6800 Series
FX 4000
PCIe: Geforce 6800 Series
Geforce 7800 Series
Quadro FX 1400, 3400, 3450, 4400, 4500


-kompatibilita zaručena výrobcem jen v případech referenčních layoutů výrobců ATI nebo NVIDIA
-doporučujeme posoudit rozměry Vaší karty s technickým nákresem výrobce (k dispozici na www výrobce)
-na reklamace vlivem nesprávného výběru nebude brán zřetel

Fan: 72 mm
Overall Dimensions: 218.5 x 100 x 31 mm
Rated Fan Speed: 2000 RPM
Bearing: ARCTIC Ceramic Bearing
Noise Level: 0.9 Sone
Weight: 428 g
Warranty: 6 Years



**Easier Installation
New clip and back plate design for better fit.
Thermal paste is already pre-applied to the heatsink.

**Exhanced Compatibility
New fan casing design to enhance compatibility.

**Ripple Noise Solution
A filter is integrated into the PCB to reduce the noise generated from the motor.

Extremely quiet
A large fan and optimized fanblades offer a minimum noise level at a high air flow.

Unique Cooling Performance
Highest fin surface area and a 3.5 mm thick copper base achieve best cooling performance at its noise level.

Efficient Memory Cooling
With this highly efficient heatsink the memories get cooled up to 6 times better than without memory cooling.

High Service Life (L10 at 30°C: 274000h)
Our ARCTIC Ceramic Bearing (alloy bearing and Ceramic shaft) provides our fans with an outstanding service life.

6 Years Warranty

DHES (Direct Heat Exhaust System)
The DHES draws cool air from inside the case and exhausts warm
air outwards. This prevents the fan from recycling warm air to cool the
GPU, which increases cooling performance.
Further the DHES lowers the air temperature inside the case, because the heat
of the GPU will be carried out directly.

Easy Installation
Compared to our VGA Silencer, we could ease the installation process significantly.


Noise Level
All measurements are taken using full fan speed.
The noise level is measured in Sone (loudness) instead of dB (sound pressure).
The loudness depends upon ears response curves and tells you exactly, how bothering a certain noise is. Sone takes the frequency and bandwidth of a sound into account.
A doubling of the number of Sones sounds to the human ear like a doubling of the loudness.
The comparison of products from different manufacturers is basically impossible, since all manufacturers measure in different ways. Even a rough translation from Sone to dB doesn't help. A 15dB cooler can be louder than a 1 Sone cooler from another manufacturer.

Nevertheless with the Sone data you can compare our coolers between each other and get a quite precise idea how annoying the product will be.
1 Sone: nearly inaudible in a computer case
2 Sones: clearly audible
3 Sones and more: disturbing

 Application:
ATI:
Radeon (HD 4850/4870), Radeon HD 38xx series, 36xx series, 2600, 2400, X1950, X1900, X1800, X1650, X1600, X1550, X1300 series
nVIDIA:
GeForce 9800GTX+, 9800GTX, 9800GT, 9600 GT, 8800GTS(G92), 8800GT, 8600, 8500, 8400, 7950GT, 7900, 7800, 7600, 7300, 6800, 6600 series (except 7X00 GS AGP)


-kompatibilita zaručena výrobcem jen v případech referenčních layoutů výrobců ATI nebo NVIDIA
-doporučujeme posoudit rozměry Vaší karty s technickým nákresem výrobce (k dispozici na www výrobce)
-na reklamace vlivem nesprávného výběru nebude brán zřetel


The award winning passive VGA cooler extends its compatibility to the latest graphic cards
The Accelero S1 Rev. 2 dramatically extends the compatibility to many of the latest graphic cards. It supports high-end to main stream graphic cards including the latest hot selling Radeon HD 3870, 3850 , GeForce 8800GTS (G92) and 8800GT.

The Accelero S1 Rev. 2 now comes with a new flexible mounting mechanism, multiple screw hole sets and modifications to the heatpipes enabling it to fit a wider range of leading graphic cards. As a result more gamers can benefit from adopting the Accelero S1 Rev. 2 which dramatically improves their gaming experience.

.

To provide passive cooling for high-end graphic cards, Accelero S1 Rev. 2 is a high performance passive cooler featuring 4 heatpipes connected with extra large surface area. It effectively removes a great deal of heat from the graphic cards keeping the components cool. Thanks to the elegant design, Accelero S1 Rev. 2 outperforms active cooling solutions. Accelero S1 Rev. 2 creates a true industry leading zero noise cooling solution for all enthusiast gamers.
Noiseless Cooling
4 Heat Pipes
Special Heat Spreader for Voltage Regulator Cooling
Memory Cooling
High Reliability
Low Weight
6 Years Warranty
The cold air is drawn from outside to cool the fins directly:


The fins design optimize for air ventilation that enhance cooling performance:


Accelero S1 Rev. 2 features 4 thick copper heatpipes which connect directly from the GPU core. The heatpipes with sintered powder wicks provide ultimate heat conductivity. Heat from the GPU is rapidly dissipated through 32 fins that extend beyond the height of the graphic card. Optimized fin design allows better air flow thus removing the heat more effectively. Together with the bundled RAM heat sinks and voltage regulator heat spreader, Accelero S1 Rev. 2 provides an all-round passive solution that achieves the best cooling performance.

Noise Level:


Temperature o­n ATI X1950Pro:


Never compromised o­n noise
Install and forget about it – No moving parts means it is maintenance free. An extra pair of mounting clips provides extensive protection to the graphic card that prevents damage from improper handling. With the help of the new mounting design, Accelero S1 Rev. 2 is widely compatible with high end ATI and nVIDIA graphic cards.

Accelero S1 Rev. 2 can still be paired with the Turbo Module – the twin fans add-on, which further increases the potential power of Accelero S1 Rev. 2 with enhanced cooling performance under extremely quiet operation. Turbo Module helps boost up the GPU and memory overclockability, squeezing more graphic performance than ever before.

 Application:
ATI HD 2900 series

-kompatibilita zaručena výrobcem jen v případech referenčních layoutů výrobců ATI nebo NVIDIA
-doporučujeme posoudit rozměry Vaší karty s technickým nákresem výrobce (k dispozici na www výrobce)
-na reklamace vlivem nesprávného výběru nebude brán zřetel


Hlučnost: 0,6 Sone

Ultimate Cooling Weapon for Hardcore Gamers

To squeeze out the extreme power from a GPU, an ultimate cooling solution was born. ARCTIC COOLING unveiled the Accelero Xtreme series ˇV the long awaited ultimate cooling weapon for all hardcore gamers. The Accelero Xtreme series is custom-made for ATI HD 2900XT/Pro and nVIDIA GeForce 8800Ultra/GTX/GT graphic cards as stock cooler replacement.

Main Features:
3 x 80mm PWM Fans
5 heatpipes Penetrate 107 Fins
Optimized air flow
Patented fan holder eliminates humming noise
Low noise impeller
Integrated memory cooling
Voltage regulator cooling
Pre-applied MX-2
Crossfire compatible
6 year warranty

"Must have" cooler for extreme graphic cards

The Accelero Xtreme features 5 heatpipes, 107 fins and 3 PWM fans. The radical optimized air flow design is targeting to cool effectively up to 240 Watt heat dissipation. The Accelero Xtreme can dramatically lower the temperature of the GPU at least 20oC lower than the stock cooler. Together with the integrated memory and voltage regulator cooling, the Accelero Xtreme not o­nly enhances the overclocking potential but also extends the card's service life.

Radical new design achieving maximum air flow with lowest noise

The three PWM fans from Accelero Xtreme bring maximum air flow but operate extremely silence, thanks to the low noise impellor design and the patented fan holder which eliminates the humming noise. The unnoticeable operation of Accelero Xtreme brings you the unparallel non-disturbed gaming experience ever before.


Heat Sink 256 L x 88 W x 21 H (mm)
Weight 440 g
Accessories (ATI) Voltage Regular Heat Sink, RAM Plate, Thermal Pads, Slot Bracket
Fan 252 L x 100 W x 32 H (mm)
Fan Speed 900 - 2000 RPM via PWM
Air Flow 63 CFM / 107 m^3 /h
Bearing Fluid Dynamic Bearing
Service Life MTTF at 40C: 400,000 h
Thermal Resistance 0.14 C/W

 Application:
nVIDIA GeForce 8800 Ultra, GTX, GT/GTS (G80)

-kompatibilita zaručena výrobcem jen v případech referenčních layoutů výrobců ATI nebo NVIDIA
-doporučujeme posoudit rozměry Vaší karty s technickým nákresem výrobce (k dispozici na www výrobce)
-na reklamace vlivem nesprávného výběru nebude brán zřetel

hlučnost: 0,7Sone

Ultimate Cooling Weapon for Hardcore Gamers

To squeeze out the extreme power from a GPU, an ultimate cooling solution was born. ARCTIC COOLING unveiled the Accelero Xtreme series ˇV the long awaited ultimate cooling weapon for all hardcore gamers. The Accelero Xtreme series is custom-made for ATI HD 2900XT/Pro and nVIDIA GeForce 8800Ultra/GTX/GT graphic cards as stock cooler replacement.

Main Features:
3 x 80mm PWM Fans
5 heatpipes Penetrate 107 Fins
Optimized air flow
Patented fan holder eliminates humming noise
Low noise impeller
Integrated memory cooling
Voltage regulator cooling
Pre-applied MX-2
Crossfire compatible
6 year warranty

"Must have" cooler for extreme graphic cards

The Accelero Xtreme features 5 heatpipes, 107 fins and 3 PWM fans. The radical optimized air flow design is targeting to cool effectively up to 240 Watt heat dissipation. The Accelero Xtreme can dramatically lower the temperature of the GPU at least 20oC lower than the stock cooler. Together with the integrated memory and voltage regulator cooling, the Accelero Xtreme not o­nly enhances the overclocking potential but also extends the card's service life.

Radical new design achieving maximum air flow with lowest noise

The three PWM fans from Accelero Xtreme bring maximum air flow but operate extremely silence, thanks to the low noise impellor design and the patented fan holder which eliminates the humming noise. The unnoticeable operation of Accelero Xtreme brings you the unparallel non-disturbed gaming experience ever before.

Heat Sink: 256 L x 88 W x 21 H (mm)
Weight: 440 g
Accessories (nVIDIA): Voltage Regular Heat Sink x 4, Thermal Pads, Slot Bracket
Fan: 252 L x 100 W x 32 H (mm)
Fan Speed: 900 - 2000 RPM via PWM
Air Flow: 63 CFM / 107 m^3 /h
Bearing: Fluid Dynamic Bearing
Service Life: MTTF at 40C: 400,000 h
Thermal Resistance: 0.14 C/W

 Application:
ATI: Radeon
HD 4870, 4850
HD 3870, 3850,
HD 2600, 2400,
X1950, X1900,
X1800, X1650,
X1600,
X1550,
X1300 series

nVIDIA: GeForce
9600GT,
8800GTS(G92), 8800GT, 8600, 8500, 8400,
7950GT, 7900, 7800, 7600, 7300,
6800, 6600 series

-kompatibilita zaručena výrobcem jen v případech referenčních layoutů výrobců ATI nebo NVIDIA
-doporučujeme posoudit rozměry Vaší karty s technickým nákresem výrobce (k dispozici na www výrobce)
-na reklamace vlivem nesprávného výběru nebude brán zřetel

Dimensions 212 L x 103 W x 34 H mm
Fan 80mm x 2 fans
Fan speed 1200 - 2000 RPM (controlled by PWM)
Air flow 40 CFM / 68m3/h
Maximum cooling capacity 120 Watts
Weight 350g


Superior Cooling Solution for High Performance Graphics Cards

A new dual-fan VGA cooler Accelero TWIN TURBO, adding a multi-compatible high performance merchandise into their reputable VGA cooler product line. With 26°C temperature reduction and 0.6 Sone noise level, the Accelero Twin Turbo is an ideal VGA cooler for enthusiasts to boost overclocking potential to a new horizon.

Main features

• Unmatched cooling performance – up to 120W
• Efficient heat transfer via 4 heatpipes and 30 fins
• Two ultra quiet 80mm fans with low noise impeller
• Patented fan holder eliminates the buzzing sound
• RAM and voltage regulator cooling
• SLi and Crossfire compatible
• Pre-applied MX-2
• Lightweight, transport safe
• 6 year warranty


Unmatched Cooling Performance
Featuring 4 heat pipes, 30 fins and 2 PWM fans, the Accelero TWIN TURBO optimises airflow to 40 CFM, and achieves up to 120 Watt cooling capacity. Together with memory and voltage regulator cooling, this new VGA cooler gives enthusiasts a very promising result – 26°C lower than the nVIDIA GeForce 9600GT stock cooler. With such phenomenal cooling performance, the Accelero TWIN TURBO also maximizes the overclocking potential and extends the service life of your graphics card.

The Art of Silence
Low noise impeller and patented fan holder are installed in the two 80mm PWM fans. This unique design reduces the humming sounds significantly and brings the noise level down to 0.6 sone, compared with 1.3 sone of noise generated from the stock cooler.

Flexible Mounting System
The universal design for the Accelero Twin Turbo supports the hottest graphics cards in the market, from nVIDIA GeForce 9600GT to ATI Radeon HD4870, 4850 and many more! It also comes with 2 fan plugs for direct power connection to the VGA card and thus the fans can be controlled by the VGA software.

 Application:
nVIDIA GeForce 9800GTX+, 9800GTX, 9800GT
Accelero Xtreme 9800 is designed for nVIDIA GeForce 9800GTX


-kompatibilita zaručena výrobcem jen v případech referenčních layoutů výrobců ATI nebo NVIDIA
-doporučujeme posoudit rozměry Vaší karty s technickým nákresem výrobce (k dispozici na www výrobce)
-na reklamace vlivem nesprávného výběru nebude brán zřetel

Heatsink 248 L x 88 W x 31 H mm
Fan 80mm x 3
Weight 560g
Fan speed 700 - 2000 RPM (controlled by PWM)
Air flow 20 CFM/fan
Max. Cooling Capacity 240 Watts
Bearing Fluid Dynamic Bearing


Ultimate Cooling Weapon for Hardcore Gamers

Designed to offer a powerful VGA cooler for maximum overclocking potential, the Accelero XTREME 9800 is compatible with the latest nVIDIA GeForce 9800 GTX.

Main features

• Maximum 29°C lower than standard cooler
• 3 ultra quiet 80mm PWM fans with low noise impeller
• Efficient heat dissipation via 5 heatpipes and 107 fins
• Patented fan holder eliminates the buzzing sounds
• Memory and voltage regulator cooling
• Pre-applied MX-2
• Maximises overclocking potential
• SLI compatible

33% cooler than stock cooler
Designed based o­n the acclaimed Accelero XTREME 8800, the Accelero XTREME 9800 is an even more powerful cooling solution for enthusiasts. Five 6mm heat pipes and 107 fins dissipate heat from the GeForce 9800 GTX card. Together with three 80mm PWM fans that transfer heat efficiently, the Accelero XTREME 9800 achieves up to 240 Watt cooling capacity, resulting in a 29°C temperature reduction from the stock cooler. In addition to the outstanding cooling performance, using the Accelero XTREME 9800 will also bring gamers a better overclocking experience and an extended service life of the graphics card.

Quietness matters
Same as other ARCTIC COOLING products, the Accelero XTREME 9800 not o­nly excels in cooling, it also offers excellent noise management. Its three 80mm PWM fans are made by low noise impellers and are installed in a unique fan holder in order to eliminate any buzzing sounds. The efficient noise control design enables the Accelero XTREME 9800 to minimize the noise level to 0.7 sone.

 Nástupce Silencer, třetí generace chladičů grafických Accelero X1 a X2.
Nvidia 6800 a 7800 (GT,Ultra) + 3 heat pipe

-kompatibilita zaručena výrobcem jen v případech referenčních layoutů výrobců ATI nebo NVIDIA
-doporučujeme posoudit rozměry Vaší karty s technickým nákresem výrobce (k dispozici na www výrobce)
-na reklamace vlivem nesprávného výběru nebude brán zřetel


Rozměry pasivu 152 * 90 * 30 (d * š * v)
Rozměry plastové části 141 * 120 * 28
Celkové rozměry 152 * 120 * 30
Otáčky ventilátoru 500 - 2000 RPM (PWM regulace)
Maximální spotřeba 0.13A
Maximální průtok vzduchu 9,82CFM / 16,7 m3/h
Hmotnost 262g
Maximánlí hluk 0,4 Sone
Tepelný odpor 0,39°C/W
Teplovodivá pasta Předem nanesená pasta MX-1
Záruka 6 let

http://www.svethardware.cz/art_doc-94A6F459FC7C1ABDC1257110007F226F.html

The Accelero series is fully Crossfire, SLI and BTX compatible. A VGA Cooler series with heatpipe technology and patented vibration absorption. The next generation of ATI and NV Silencer.

 ATI:
HD 2400 series
X1650, X1600, X1550, X1300, X1050 series
X850, X800, X700, X600, X550, X300 series
9XXX series
nVIDIA:
GeForce 8500, 8400 series
GeForce 7600, 7300, 6600 series
FX 5950, 5900, 5700 (Ultra) series
FX 5600, 5500, 5200 series
GeForce 4 Ti, MX series

-kompatibilita zaručena výrobcem jen v případech referenčních layoutů výrobců ATI nebo NVIDIA
-doporučujeme posoudit rozměry Vaší karty s technickým nákresem výrobce (k dispozici na www výrobce)
-na reklamace vlivem nesprávného výběru nebude brán zřetel


Radically new noiseless passive dual heatpipes graphic card cooling solution
Without moving parts inside, Accelero S2 effectively helps the graphic card to remove heat and silently keeps the components cool. Thanks to the elegant design, Accelero S2 can even outperform other active cooling solutions, bringing a true industrial leading zero noise solution for demanding users.

Noiseless Cooling
Dual Heat Pipes
Memory Cooling
High Reliability
Low Weight
6 Years Warranty

Heat Sink: 140(L) x 188(W) x 32(H) mm
Heat pipe: 6 mm x 2
Weight: 202 g
Accessories: 8 Memory Heat Sinks
Warranty: 6 Years


Noise Level
The noise level is measured in Sone (loudness) instead of dB (sound intensity).
The loudness depends upon ears response curves and tells you exactly, how bothering a certain noise is.

Thermal Compound
We ship our coolers with the ARCTIC MX-1 thermal compound. This compound hardens during the first 200h while the performance improves steadily. With heating up the paste / heatsink the process can be shortened. The performance is even from the beginning good enough to cool your CPU reliable.

 Application:
Accelero S1, Accelero S1 Rev. 2
Accelero S2
Turbo Module is designed for fit o­n Accelero S1 and S2 o­nly.


-kompatibilita zaručena výrobcem jen v případech referenčních layoutů výrobců ATI nebo NVIDIA
-doporučujeme posoudit rozměry Vaší karty s technickým nákresem výrobce (k dispozici na www výrobce)
-na reklamace vlivem nesprávného výběru nebude brán zřetel


Fan: 80 x 80 x 15 mm (each)
Fan Speed: 1500 RPM
Air Flow: 42 CFM
Bearing: Sleeve Bearing
Plug: 3 pin plug (with power plug convertor)
Weight: 35 g (each)
Warranty: 6 Years


Boost up your passive cooling
Turbo Module is an ultimate cooling add-on for enthusiast gamers. The Turbo Module increases the potential power of Accelero S1 and S2 with enhanced cooling performance under extreme quiet operation. Turbo Module helps boost up the GPU and memory overclockability, squeezing more graphic performance than ever before.

Main Features:

Dual High Performance Fans
Enhance Cooling Performance
Extremely Quiet
High Reliability
Easy Installation
Low Weight
Long Lifetime
6 Years Warranty
Designed for Overclocker
Featuring dual high performance low noise fans, Turbo Module was designed to work together with Accelero S1 and Accelero S2 – the widely adopted and award winning passive cooler for numerous ATI and nVIDIA graphic cards. The optimized fan speed dramatically reduces the temperature of GPU, RAM and Voltage Regulator. Turbo Module especially reinforces the PC case overall ventilation, and its clip-on design allows for easy installation.

Hlučnost: 0,1 Sone