Guardian over the NET - vzdálený dohled a monitorování prostředí v serverovnách přes IP (enviromental control)
měří a kontroluje přesTCP/IP různé parametry (teplota, vlhkost, napájení el.proudem, případný kouř v místnosti…), při abnormální situaci posílá automatická výstražná hlášení

Remote environment control for outlets via TCP/IP.
Daisy chain up to 255 additional stations.
Individual control of each port - users can set the environment settings (Temperature, humidity, voltage and current) to allow equipment to be monitored for irregularity.
Provides two configuration/management methods: Browser, or ssConsole*.
Easy setup and operation via a browser GUI interface.
Remote users can monitor the current status via the GUI on their browsers.
LEDs for easy status monitoring.
Multi-user access (1 Administrator, 4 Users).
Two level (Administrator and User) security.
Firmware upgradeable.
* ssConsole (Serial Server Console) is an application program provided with the GN0116.

Obsah balení:
1x GN0116 Station
1x AC Source Power Cord
8x Power Outlet Power Cords
1x RS-232 to RJ-45 Cable
1x RJ-45 Cable
2x Temperature Sensor Sets
1x User Manual
1x Quick start guide
1x Mounting Kit :Rack mounting brackets and hardware/4 foot pads
1x Software CD
1x Registration card
* For countries that use a 220 - 250V power source *

 Control Center Over the NET™

The CC1000 Control Center Over the NET™ provides centralized access,administration, and management of your data centers - local and worldwide at anytime, from anywhere.
This software based solution consolidates the management of your ALTUSEN " Over the NET™ " devices, providing a convenient, flexible way to meet your IT infrastructure needs.
* Web Browser - Single IP Access
* Tight Security Regulates User Access and Control
* Scalability Expands to Fit Your Individual Needs
* Monitoring, Diagnosis, and Resolution of Network Problems Made Easy

Secure Centralized Management
• Complete control of your enterprise – consolidates the management of all ALTUSEN / ATEN IT devices
• Single IP address to securely access every device on the installation
• All devices are integrated into a single tree view for centralized access, administration, and management of a worldwide network from anywhere at anytime
• Web browser access over Internet/Intranet provides secure remote connections to all installed devices
• Windows and Java versions for multiplatform support

Highlights
• Ideal for enterprises with one or more data centers, or a number of remote offices
• Easy to use – intuitive browser-based GUI for simplified access to IT equipment in global data centers and remote offices
• Scalability – Multi-user access to hundreds of ALTUSEN / ATEN IT appliances and more than ten thousand servers and serially controlled devices
• A single login provides secure, centralized management of multiple data centers, branch offices and remote locations
• Provides centralized management, Role-Based Access and Control(RBAC), and Reporting Capabilities

Powerful Security
• Powerful security features that enable integration with Active Directory external authentication tools
• IP-based control lists and IP filtering manages user access

Robust security policies for individual user authorization to the port level
• 128-bit SSL encryption of all data on the network
• Flexible session time-outs and password expirations
• "Strong" user name and password authentication

Network Interfaces
• TCP/IP
• HTTP / HTTPS
• SSL
• DNS
• LDAP / LDAPS

Software Features
• All features – including access, configuration and administration accessible via Web browser
• Powerful portal-like interface provides customized permission-based groupings and device views
• ALTUSEN / ATEN IT appliance auto-discovery with device-availability status, health updates, and alarms
• Flexible User Access licensing model
• Java client for multiplatform access

Access and Control from Anywhere at Anytime
• An array of flexible logging and reporting options with audit trails for diagnostics and troubleshooting
• View and manage active user sessions and active ports in real time

Package Content
1x CC1000 USB Authentication Key
1x USB Extension Bracket
2x USB Cables (1x External, 1x Internal)
1x Software CD
1x User Manual
1x Quick Start Guide
1x Registration Card

 8-Port Serial Over the NET™

The SN0108 Serial Over the NET™ is a control unit that provides remote serial access to up to eight servers or other serial IT devices (hubs, routers, power management devices, etc.).Via TCP/IP connection,up to eight users can logged in simultaneously from any computer connected to the Internet, whether it is down the hall or half way across the world. Each user is able to control a separate port thus all eight attached devices can be accessed concurrently.

Complete Centralized Remote Serial Management:
• Remote serial access over the Internet for up to 8 servers or other serial IT devices
• Works in tandem with other ALTUSEN / ATEN appliances — such as the PN0108 and PN9108 — allowing administrators to manage a wide range of data center devices through IP connections
• Remote access to Serial over IP appliances, and attached devices, in centralized manner
Security:
• Multi level secure user logins
• Port-specific access rights
• Supports Active Directory via CC Management
• Supports RADIUS

Convenient Access:
• Browser access with an intuitive GUI
• Telnet client – SSH, Telnet and third party client (PuTTY, etc.) compatible, file-based session logging, cut and paste, print screen, session history, macro support, plus a wide range of terminal emulations
• Console terminal
• Direct port addressing — via SSH to any Serial Over IP port (bypassing the SN0108)
• Dial in Modem and Direct
• Access via serial applications (such as HyperTerminal and PPP), or IP applications (such as SSH and Telnet)
• Modem sharing capability via IP forwarding (Modem support)

Sun Ready:
• Hardware break suppression ensures uninterrupted Solaris server operation

Network Interfaces:
• TCP/IP, UDP/IP, HTTP, HTTPS, NTP, SNMP, Telnet, SSH, SSL, PPP
• 10Base-T/100BaseTX auto sense, DNS, DHCP, ARP, RADIUS, Ping

Serial Connectivity:
• VT320 support – backward compatible to VT52 (VT52, 100, 220)
• Hardware and software flow control
• Real COM port support, Raw TCP Mode support

Alarms and Alerts:
• Client applications
• Buzzer
• SNMP Traps

OS Support:
• Windows, Mac, Sun, Linux, Unix, AIX, DOS 6.2+

Code Set Support:
• ISO646 — US (US ASCII), ISO8859 - 15 (Latin -9)

General:
• Hot-pluggable — add and remove servers without rebooting
• Rack mountable in 1U system rack
• Easy setup — plugging cables into their ports is all it takes

Package Content
1x SN0108 Serial Over the NET™
1x Power Cord
1x Rack Mount Kit (Brackets and Phillips head hex M3 x8 screws)
1x Foot Pad Set (4 pcs.)
1x User Manual
1x Software CD
1x Quick Start Guide
1x Registration Card

 16-Port Serial Over the Net™

The SN0116 Serial Over the NET™ is a control unit that provides remote serial access to up to sixteen servers or other serial IT devices (hubs, routers, power management devices, etc.).Via TCP/IP connection,up to sixteen users can logged in simultaneously from any computer connected to the Internet, whether it is down the hall or half way across the world. Each user is able to control a separate port thus all eight attached devices can be accessed concurrently.

Features
Complete Centralized Remote Serial Management:
• Remote serial access over the Internet for up to 16 servers or other serial IT devices
• Works in tandem with other ALTUSEN / ATEN appliances — such as the PN0108 and PN9108 — allowing administrators to manage a wide range of data center devices through IP connections
• Remote access to Serial over IP appliances, and attached devices, in centralized manner

Security:
• Multi level secure user logins
• Port-specific access rights
• Supports Active Directory via CC Management
• Supports RADIUS

Convenient Access:
• Browser access with an intuitive GUI
• Telnet client – SSH, Telnet and third party client (PuTTY, etc.) compatible, file-based session logging, cut and paste, print screen, session history, macro support, plus a wide range of terminal emulations
• Console terminal
• Direct port addressing — via SSH to any Serial Over IP port (bypassing the SN0116)
• Dial in Modem and Direct
• Access via serial applications (such as HyperTerminal and PPP), or IP applications (such as SSH and Telnet)
• Modem sharing capability via IP forwarding (Modem support)

Sun Ready:
• Hardware break suppression ensures uninterrupted Solaris server operation

Network Interfaces:
• TCP/IP, UDP/IP, HTTP, HTTPS, NTP, SNMP, Telnet, SSH, SSL, PPP
• 10Base-T/100BaseTX auto sense, DNS, DHCP, ARP, RADIUS, Ping

Serial Connectivity:
• VT320 support – backward compatible to VT52 (VT52, 100, 220)
• Hardware and software flow control
• Real COM port support, Raw TCP Mode support

Alarms and Alerts:
• Client applications
• Buzzer
• SNMP Traps

OS Support:
• Windows, Mac, Sun, Linux, Unix, AIX, DOS 6.2+

Code Set Support:
• ISO646 — US (US ASCII), ISO8859 - 15 (Latin -9)

General:
• Hot-pluggable — add and remove servers without rebooting
• Rack mountable in 1U system rack
• Easy setup — plugging cables into their ports is all it takes


Package Content
1x SN0116 Serial Over the NET™
1x Power Cord
1x Rack Mount Kit (Brackets and Phillips head hex M3 x8 screws)
1x Foot Pad Set (4 pcs.)
1x User Manual
1x Software CD
1x Quick Start Guide
1x Registration Card

 8-Port Power Over the NET™
PN0108 is not a stand-alone unit. It must be connected to the CN6000, PN9108, SN0108 or SN0116 to access these features

Altusen's PN0108 is equipped with eight hotpluggable ports for easy server rooom management. Each port can be individually controlled so that users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order. On/Off scheduling allows for preset start/shutdowns/restarts on a daily, weekly,monthly basis.
The PN0108 is the most convenient, reliable and cost effective way to obtain access to your server room remotely

Features
Remote power on / off / reboot control for eight outlets via TCP/IP and a built in RS-232 PON (Power Over the NET™) port
Local power on / off / reboot control via the PN0108’s PON port to the computer’s RS-232 port
Daisy chain up to 15 additional stations to control up to 128 outlets
Manual switching between Local and Remote access for each port via front panel push button switches
Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
Easy setup and operation via a GUI interface
Provides three configuration/management methods: Browser, Telnet, or Console Terminal
Safe shutdown and rebooting for Windows systems*
Overcurrent protection and recovery for each AC port (110 V model only), total port overcurrent protection (both models) - remote users can monitor the outlet status via the GUI interface
Separate circuits for the unit’s power and the power to the devices – the power control status menu is still accessible even when an overcurrent condition trips the devices’ circuit breaker
On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times
Port grouping - perform the same action on a specified group of ports
LEDs for easy status monitoring
Two level (Administrator and User) security
Configuration can be reset
Firmware upgradeable - daisy chained stations receive the upgrade via the daisy chain bus
UL/TUV approved
OS Support:Windows 2000, Windows XP, Windows Vista, LINUX, Unix and FreeBSD

*Safe shutdown and rebooting is supported if the Power Monitor utility has been installed
*The PN0108 is not a stand-alone unit. It must be connected to the CN6000, PN9108, SN0108 or SN0116 to access these features

Package Content
1x PN0108 Station
1x AC Source Power Cord
8x Power Outlet Power Cords
8x Safe Shutdown Cables
1x PON Cable (DB9 F to DB9 M)
1x User Manual
1x Quick start guide
1x Mounting Kit :Rack mounting brackets and hardware
4x foot pads
1x Software CD
1x Registration card

 8-Port Power Over the NET™

The PN9108 Power over the NET™ is a control unit that provides remote power management for eight AC outlets via a TCP/IP connection, allowing administrators to control the power off, power on, and reboot status for each attached device from any computer connected to the Internet, whether down the hall, or half way around the world.
The PN9108 is the most convenient, reliable and cost effective way to obtain access to your server room remotely.

Features
Remote power on / off / reboot control for eight outlets via TCP/IP and a built in 10/100 Ethernet port
Local power on / off / reboot control via the PN9108’s RS-232 port to the computer’s RS-232 port
Daisy chain up to 15 additional stations to control up to 128 outlets
Manual switching between Local and Remote access for each port via front panel push button switches
Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
Easy setup and operation via a browser interface
Provides three configuration/management methods: Browser, Telnet, or Console Terminal
Safe shutdown and rebooting for Windows systems*
Overcurrent protection and recovery for each AC port (110 V model only) plus total port overcurrent protection (both models) - remote users can monitor the outlet status via the GUI interface on their browsers
Separate circuits for the unit’s power and the power to the devices – the power control status menu is still accessible even when an overload condition trips the devices’ circuit breaker
Cumulative load measurement - remote users can view load information in amperes via the GUI on their browsers
On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times
Port grouping - perform the same action on a specified group of ports
Current Display for easy current status monitoring
Out of Band (OOB) operation via terminal or dialup connection
Two level (Administrator and User) security
Detachable front panel for convenient rack mounting
UL/TUV approved
OS Support:Windows 2000, Windows XP, Windows Vista, LINUX, Unix and FreeBSD
Network Interfaces: TCP/IP, PPP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, ARP, NTP, DNS, Telnet, 10Base-T/100Base-TX, auto sense, Ping
*Safe shutdown and rebooting is supported if the Power Monitor utility has been installed

Package Content
1x PN9108 Station
1x AC Source Power Cord
8x Power Outlet Power Cords
8x Safe Shutdown Cables
1x PON Cable (DB9 F to DB9 M)
1x Rack Mount Kit (Brackets and Phillips head hex M3 x 8 screws)
4x Foot Pads
1x Software CD
1x User Manual
1x Quick start guide
1x Registration card

 Příslušenství k produktům ATEN SN-0108 a SN-0116.

• Complete Remote Serial Management: Remote serial access over the Internet for up to 8 (SN0108) or 16 (SN0116) servers or other serial IT devices
• Secure: Multi level secure user login, user authentication, port-specific access rights
• Easy Setup: Plugging cables into their ports is all it takes
• Network Access: Convenient browser access with an intuitive GUI, Telnet client access, and Terminal emulation access
• Dial in Modem Access: Using serial applications (such as Hyperterminal), or IP applications (such as Telnet)
• Direct Port Addressing: Sessions may be established directly to any Serial over IP port using SSH
• Direct terminal attachment
• Hardware and software flow control
• Surge protection
• Hot-pluggable - Add and remove servers without rebooting
• Rack mountable in 1U system rack
• Sun Ready: Hardware break suppression ensures uninterrupted operation of your Solaris server
• Supports TCP/IP, UDP/IP, Telnet, SSH, SSL and PPP
• Console port automatically detects and adjusts to incoming protocol

 • Complete Remote Serial Management: Remote serial access over the Internet for up to 8 (ASS-SN0108) or 16 (ASS-SN0116) servers or other serial IT devices
• Secure: Multi level secure user login, user authentication, port-specific access rights
• Easy Setup: Plugging cables into their ports is all it takes
• Network Access: Convenient browser access with an intuitive GUI, Telnet client access, and Terminal emulation access
• Dial in Modem Access: Using serial applications (such as Hyperterminal), or IP applications (such as Telnet)
• Direct Port Addressing: Sessions may be established directly to any Serial over IP port using SSH
• Direct terminal attachment
• Hardware and software flow control
• Surge protection
• Hot-pluggable - Add and remove servers without rebooting
• Rack mountable in 1U system rack
• Sun Ready: Hardware break suppression ensures uninterrupted operation of your Solaris server
• Supports TCP/IP, UDP/IP, Telnet, SSH, SSL and PPP
• Console port automatically detects and adjusts to incoming protocol

 • Complete Remote Serial Management: Remote serial access over the Internet for up to 8 (ASS-SN0108) or 16 (ASS-SN0116) servers or other serial IT devices
• Secure: Multi level secure user login, user authentication, port-specific access rights
• Easy Setup: Plugging cables into their ports is all it takes
• Network Access: Convenient browser access with an intuitive GUI, Telnet client access, and Terminal emulation access
• Dial in Modem Access: Using serial applications (such as Hyperterminal), or IP applications (such as Telnet)
• Direct Port Addressing: Sessions may be established directly to any Serial over IP port using SSH
• Direct terminal attachment
• Hardware and software flow control
• Surge protection
• Hot-pluggable - Add and remove servers without rebooting
• Rack mountable in 1U system rack
• Sun Ready: Hardware break suppression ensures uninterrupted operation of your Solaris server
• Supports TCP/IP, UDP/IP, Telnet, SSH, SSL and PPP
• Console port automatically detects and adjusts to incoming protocol

 • Complete Remote Serial Management: Remote serial access over the Internet for up to 8 (ASS-SN0108) or 16 (ASS-SN0116) servers or other serial IT devices
• Secure: Multi level secure user login, user authentication, port-specific access rights
• Easy Setup: Plugging cables into their ports is all it takes
• Network Access: Convenient browser access with an intuitive GUI, Telnet client access, and Terminal emulation access
• Dial in Modem Access: Using serial applications (such as Hyperterminal), or IP applications (such as Telnet)
• Direct Port Addressing: Sessions may be established directly to any Serial over IP port using SSH
• Direct terminal attachment
• Hardware and software flow control
• Surge protection
• Hot-pluggable - Add and remove servers without rebooting
• Rack mountable in 1U system rack
• Sun Ready: Hardware break suppression ensures uninterrupted operation of your Solaris server
• Supports TCP/IP, UDP/IP, Telnet, SSH, SSL and PPP
• Console port automatically detects and adjusts to incoming protocol